Description
The STC-3028 is a popular digital thermostat that can be used to control the temperature of a variety of appliances, such as incubators, fermentation chambers, and aquariums. It has a wide temperature range of -20°C to 80°C and a high accuracy of ±1°C. The STC-3028 also features a dual display that shows both the current temperature and the set temperature.
The STC-3028 is easy to use and can be programmed with just a few buttons. It has two output modes: heating and cooling. In heating mode, the STC-3028 will turn on a heating device when the temperature falls below the set point. In cooling mode, the STC-3028 will turn on a cooling device when the temperature rises above the set point.
Here’s a guide on how to program the STC-3028 Temperature Controller:
1. Accessing the Programming Menu:
- Press and hold the “SET” button for 3 seconds. This will enter the programming mode, and the first setting will start flashing.
2. Navigating Settings:
- Use the “UP” and “DOWN” buttons to move between settings.
- Press and hold the “SET” button for 3 seconds to save a setting and move to the next one.
3. Setting Temperature Parameters:
- Set the starting temperature (LS): This is the temperature at which the cooling or heating device will turn on.
- Set the stopping temperature (HS): This is the temperature at which the cooling or heating device will turn off.
- Set the differential temperature (d): This is the difference between the starting and stopping temperatures.
4. Choosing Output Mode:
- Press and hold the “UP” and “DOWN” buttons simultaneously for 3 seconds to toggle between heating and cooling modes.
5. Calibrating Temperature (Optional):
- If needed, calibrate the temperature reading: Press and hold the “SET” and “UP” buttons together to adjust the temperature calibration.
- Press and hold the “SET” and “DOWN” buttons together to adjust the humidity calibration (if applicable).
6. Saving and Exiting:
- Press and hold the “SET” button for 5 seconds to save all settings and exit the programming mode.
Package included: 1 x STC-3028 temperature humidity controller 1 x Integrated sensor
Reviews
There are no reviews yet.